Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Berkley, CO
Chimney inspection in Berkley starts with a simple fact: a lot of the housing here predates modern building codes, and much of it still burns wood. That means the typical Berkley chimney job is a creosote question, not a gas-vent question, and the flues are often short, shared-chase, or unlined masonry rather than the smooth factory liners in newer builds west of the ZIP. We handle the sweep, the inspection, and the repair with professional-grade parts, so you aren’t stuck coordinating three contractors. Call (855) 508-5717 and we’ll book your visit.
Why Berkley Homes Are Different
Berkley (80030) is a small, older industrial-residential enclave wedged between Denver and the suburbs. The housing stock is mostly mid-20th-century and earlier single-family homes and small rentals, many with original masonry fireplaces or wood stoves these houses were retrofitted with over the decades. Original masonry and a retrofit stove burn differently, and both leave heavier creosote than a modern gas insert ever will.
Front Range winters are cold with sharp temperature swings, so the wood-burning season is long and the fire gets worked hard. Then summer hail and wind storms roll through and drop debris on chimney caps or crack them outright, which lets water into the flue. Cleaning demand spikes at the start of heating season and again after a big storm. A technician who knows this ZIP expects a standard brush-and-vacuum job to turn into a creosote-glaze or relining conversation more often than it would in the newer suburban builds just outside it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Berkley Services
Two jobs bring most Berkley homeowners to the phone: a sweep when the flue is loaded up, and a repair when something has cracked, pulled loose, or failed.
Chimney Sweep in Berkley
In Berkley’s older close-set homes, the flue is often short, shares a chase with a neighboring stack, or was never lined at all. A proper sweep here means getting the right brush and vacuum setup to the right flue, clearing the creosote that builds fast in hard-worked wood fireplaces, and checking the smoke chamber while we’re in there. We document what came out, because a clean flue and a written record of it are worth more than a verbal “you’re all set.” For the full scope, see Chimney Sweep in Berkley.

Chimney Repair in Berkley
Berkley repair work usually starts with cracked or spalled masonry, a damaged crown that lets water in, or a flue that has lost its integrity and needs relining. We source parts through Copperfield and Olympia Chimney, so what goes into your chimney is traceable and professional-grade, not a hardware-store substitute. When the flue needs resurfacing, we use HeatShield; when it needs a new liner, we install DuraFlex. The full repair scope is covered at Chimney Repair in Berkley.

Chimney Inspection in Berkley

Chimney Inspection in Berkley answers a question most homeowners here can’t answer themselves: is the flue in this older house still safe to burn? The homes that make up most of 80030 were built before modern code, many still heat with wood, and original masonry or a retrofitted stove holds creosote in ways a gas appliance never does. We look at the whole system, document what we find, and tell you plainly when work can wait. We provide Chimney Inspection for annual safety checks, real estate transactions, and insurance requests, and our technicians have up to experience reading exactly this kind of older flue.
Fireplace Inspection
Signs you need it
You’re getting smoke spillage into the room, the firebox brick has cracks or loose mortar joints, or the damper no longer opens and closes cleanly.
What it costs in Berkley
A basic fireplace inspection typically runs $99 – $199, with a camera-assisted look at $150 – $350 when the flue or smoke chamber needs closer review.
How we do it
We inspect the firebox, damper, smoke chamber, and firebox-to-flue transition, then photograph anything that looks worn or cracked so you can see it yourself.
Chimney Flue Inspection
Signs you need it
Creosote is glazing on the flue walls, the chimney has never been relined, or you’re seeing dark stains or a strong smell on the exterior of the stack.
What it costs in Berkley
Camera inspection of the flue typically runs $150 – $350, and a basic inspection starts around $99.
How we do it
We run a camera down the flue to check for cracks, gaps at the joints, and glaze, then show you the footage and name what it means before recommending anything.
What Chimney Inspection Costs in Berkley
The written estimate sets the final price, and we give it to you before any work begins.
| Item | Typical range in Berkley |
|---|---|
| Basic chimney inspection | $99 – $199 |
| Camera-assisted flue inspection | $150 – $350 |
| Level 2 inspection | $200 – $450 |
Can a chimney inspection find problems a sweep can’t?
Yes. A sweep clears creosote, but a camera inspection catches cracks, gaps at the flue joints, and unlined masonry that a brush never touches, which matters most in Berkley’s older homes. Call (855) 508-5717 for a free estimate.
Do I really need a Level 2 inspection in Berkley?
A Level 2 inspection is the deeper camera-based look most older flues need, and it’s the level real estate and insurance requests usually call for. It typically runs $200 – $450. Call (855) 508-5717 for an exact quote.
Brands We Service in Berkley
We work with DuraFlex, HeatShield, and Gelco liners and repair systems, along with parts sourced through Olympia Chimney and Copperfield. That means the product going into your flue is one certified professionals use, not a generic substitute. Turnaround depends on parts availability, and we’ll tell you that upfront. Browse our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Berkley, CO
Pricing is set per job by the written estimate, so treat every figure below as a typical range for this market, not a quote.
| Service | Typical range in Berkley |
|---|---|
| Chimney sweep | $150 – $350 |
| Basic chimney inspection | $99 – $199 |
| Camera-assisted flue inspection | $150 – $350 |
| Level 2 inspection | $200 – $450 |
| Creosote removal (heavy glaze) | $250 – $500 |
| Crown repair | $250 – $600 |
| Masonry and tuckpointing repair | $400 – $1,200 |
| HeatShield flue resurfacing | $1,200 – $2,500 |
| DuraFlex liner installation | $2,000 – $4,500 |
In Berkley, heavy creosote glaze from older wood stoves and unlined masonry that needs relining are what push the price up most. We agree the price upfront and put it in writing before we start, so nothing on the invoice is a surprise.
Neighborhoods We Serve in Berkley
We work across Berkley and the surrounding blocks of 80030, mostly in the older single-family homes and small rentals that line the industrial-residential streets. Because the housing here is close-set, a job can turn into a creosote-glaze conversation faster than it would in a newer suburb, and we plan the visit with that in mind.
- Berkley Gardens
- Berkeley Park
- Regis
- Tennyson
- Highland Park
Response time depends on the season, so call early in the fall before the heating demand spikes; we close on Saturday.
Service Area – Cities Near Berkley
We also serve homeowners in the neighboring communities around Berkley. If you’re just outside our map and want a sweep or an inspection before winter, call and we’ll confirm coverage. Nearby cities include Twin Lakes, CO, Arvada, CO, Superior, CO, and Glendale, CO. Our main service area is Arvada, and the work we do there is the same professional scope we bring to Berkley.
Serving Berkley, CO – Our Local Coverage Area
We serve Berkley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Berkley
Most cities require a permit for structural masonry or relining work, so ask your city’s building department before we schedule. Tell us what the department says, and we’ll plan the job around it. Call (855) 508-5717 for a free estimate.
We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm, with same-day visits when the schedule allows. Nothing is promised after hours; a call outside dispatch hours books into the next opening. Call (855) 508-5717 to schedule.
Yes, we cover 80030 and the blocks around it, including the small rentals and industrial-residential streets that make up most of the ZIP. Call (855) 508-5717 to confirm your address, and we’ll set a day that works.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Berkley Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Keisha Ingram"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Neil Anderson"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Beatriz Morales