Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Gunbarrel, CO
We provide independent DuraFlex chimney cleaning and service throughout Gunbarrel, CO, and we’re not affiliated with the manufacturer, so we work on your liner on its merits. What makes our DuraFlex work different here is the way we read Gunbarrel’s wind before we read the flue: the westerly downslope winds off the Flatirons drive moisture into uncapped terminations, and rural-edge homes burning wood and pellets through the long heating season build glazed creosote fast. We sweep, inspect, and repair under one roof, then tell you plainly what we found. Call (855) 508-5717 for a free estimate.

Why Gunbarrel Residents Choose Us for DuraFlex Service
DuraFlex is a flexible stainless steel chimney liner, and it’s one of the relining systems we see most often when we climb onto Gunbarrel roofs. That matters because familiarity with a product is what catches the small things: a stretched cap mesh, a top plate that’s worked loose at the screws, a tee that’s pulled slightly off the collar after a cold snap. We don’t sell DuraFlex, we don’t answer to DuraFlex, and we’re not factory-authorized. We’re an independent shop that repairs, installs, and services DuraFlex equipment with quality parts that fit it properly.
Our technicians have up to experience reading flues, and they bring a Level 2 camera inspection to the Gunbarrel jobs that call for it – which, off the Flatirons, is more of them than you’d think. You get a fixed flat-price sweep agreed before we book, camera documentation you can look at yourself, and no recommendation we can’t back with a photo. We work across Gunbarrel, from the subdivision streets to the acreage properties at the rural edge. Calling is simple: we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Gunbarrel
Gunbarrel’s conditions produce a predictable set of DuraFlex problems. Here’s what we actually find and fix.
- Wind-driven moisture at the termination. The strong westerly downslope winds off the Flatirons push rain and snow into uncapped or poorly capped DuraFlex flues. Over a few seasons the stainless at the top section can corrode and the cap mesh can degrade to the point where it stops shedding water and starts letting birds in. We inspect the cap and the top course of liner together, because one failing usually stresses the other.
- Glazed third-degree creosote on stove and pellet flues. On rural-edge Gunbarrel properties burning wood or pellets through the long heating season, creosote builds fast enough that by mid-season many sweeps find glazed, third-degree deposits coating the liner interior. Glazed creosote is a genuine chimney-fire hazard, not a cosmetic problem, and it needs rotary or chemical removal matched to the deposit degree – not a quick brush.
- Loose tee and appliance-collar connections. Original 1970s-90s masonry settles over time, and the insert collar, top plate, and tee on a DuraFlex hookup can loosen or crack as the chimney shifts. A loose tee connection leaks flue gases into places you don’t want them. We check every joint on the appliance side, not just the flue interior.
- Crushed or corroded cap and top-plate assemblies. Snowmelt and repeated freeze-thaw cycles work on the exposed termination, warping caps and splitting top plates that were straight when they went in. Once a cap is crushed or the plate is corroded through, it’s replaced – not bent back into shape.
- Smoke smell and poor draft after a cold snap. A homeowner notices a smoky smell on the first windy cold night, and the cause is usually a combination: a creosote-clogged flue plus a wind-battered cap. Fixing one without the other leaves you back where you started. We diagnose both in a single visit.
DuraFlex Service in Gunbarrel: What Local Conditions Mean for Your Equipment
Gunbarrel sits in an unincorporated Boulder County pocket where the housing stock splits two ways: 1970s-90s subdivisions with factory-built or masonry fireplaces, and semi-rural lots on acreage that often run wood or pellet stoves as primary supplemental heat. That split shapes the DuraFlex work directly. A single service call here can mean anything from a full glazed-liner creosote removal on a stove flue to a simple capped-fireplace sweep in a 1980s two-story on the subdivision side. A typical Gunbarrel call starts with a homeowner noticing a smoky smell or poor draft after a windy cold snap. The sweep often finds glazed creosote built up fast through the long heating season plus a wind-battered cap with corroded mesh at the termination. We run a Level 2 inspection with a camera, remove the creosote with the method the deposit degree actually calls for, and replace the damaged DuraFlex cap or top plate before checking the tee and appliance collar for looseness. It’s the same arc every time. Find the problem, name it, fix it right. Call (855) 508-5717 for a free estimate.
DuraFlex Models & Products We Service in Gunbarrel
We handle the DuraFlex flexible stainless liner systems you’re likely to have on a Gunbarrel chimney: single-wall liners for wood stoves, insulated liner kits where the flue clearances call for them, ovalized liners shaped to fit tight masonry flues, and the tee-and-cap assemblies that connect inserts and stoves. When a component needs replacing, we choose a part that matches the existing system’s dimensions and material grade rather than forcing something close. For direct replacement we look for DuraFlex liner, cap, and tee components that fit; for accessory-level repairs, a quality aftermarket cap or clamp is fine. A corroded or crushed liner section gets replaced, never patched.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Gunbarrel
Chimney sweeping in Gunbarrel typically runs $180-$340, and a Level 2 inspection with camera documentation usually falls in the $250-$450 range. Liner work – replacing a corroded cap or top plate, or relining a flue – is priced per job by the written estimate once we’ve seen the termination and the flue interior. Visit our DuraFlex service page for the full breakdown of what we handle.
- Standard sweep: $180-$340
- Level 2 camera inspection: $250-$450
- Cap and top-plate replacement: priced per job by written estimate
- Liner relining: priced per job by written estimate
Every estimate is free and the written estimate sets the final price – no number moves after you sign. If your DuraFlex system can safely wait a season, we’ll tell you that too. Call (855) 508-5717 for an exact quote. Estimates are free.

Serving Gunbarrel, CO – Our Local Coverage Area
We serve Gunbarrel and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Gunbarrel
Glazed creosote forms fast in Gunbarrel because rural-edge homes burn wood or pellets through a long, cold heating season without enough drying time between fires. The strong downslope winds off the Flatirons also create draft swings that cool the flue and deposit creosote faster. If you’re seeing glaze by mid-winter, the flue needs a proper sweep before the next burn. Call (855) 508-5717 to book a sweep.
Yes, it’s a Gunbarrel wind problem. The westerly downslope winds funnel off the Flatirons and hammer exposed terminations, and snowmelt plus freeze-thaw cycles accelerate corrosion and warping. A properly seated cap with intact mesh handles it far better than one that’s already loose. We inspect and replace caps as part of a standard visit.
Most Gunbarrel DuraFlex systems we see need a Level 2 with camera documentation, especially rural-edge stove flues or any system with a recent draft or smoke complaint. A Level 1 is a visual check only and can’t see inside the liner. We’ll tell you which level your situation actually calls for – not which one costs more.
Often yes. 1970s masonry around Gunbarrel’s subdivision homes has had decades of freeze-thaw cycles, and the mortar joints in the smoke chamber and crown take the worst of it. We check the masonry alongside the liner. Repointing is sometimes worth doing now, and sometimes it can safely wait – the camera report shows you which.
Yes, it’s safe to sweep – a rural lot with well water and acreage doesn’t change the sweep process, but it does change what builds up in the flue. Stoves on acreage properties tend to run harder and longer, which means heavier creosote loads and more frequent sweeping. We assess the deposit degree and clean accordingly. Call (855) 508-5717 for a free estimate.
Service Areas Near Gunbarrel
We serve Gunbarrel homeowners and nearby communities, including Superior, Twin Lakes, Louisville, and Lafayette, as well as Arvada and Berkley. Whether your home sits on a subdivision street or out on acreage near one of these towns, the same standard applies: a documented sweep, a camera inspection when the situation calls for it, and repairs done with the right part. Call (855) 508-5717 to book.
Book Your DuraFlex Service in Gunbarrel Today
If your DuraFlex liner needs a sweep, a Level 2 inspection, a cap replacement, or a full look at the tee and appliance collar, call (855) 508-5717. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the written estimate sets the final price, and we tell you plainly when work can safely wait.
Written by the team at Arvada Chimney Cleaning.