Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Lafayette, CO
We provide independent Gelco service across Lafayette, from the pre-war brick bungalows near Public Road to the framed subdivisions out toward Coal Creek. The one thing that makes our Gelco work here different: in this town of about 30,000, a Gelco insert can be sitting in a coal-era brick chimney or in a 1990s direct-vent chase, and those are two entirely different service calls. We work on Gelco fireplace inserts and prefab metal fireplaces as hands-on chimney technicians, not as factory representatives. That matters because the cleaning and inspection approach has to match the flue, not just the brand on the firebox.

As an independent Gelco service provider, we’re not affiliated with or authorized by the manufacturer. What we bring is experience with how these units actually fail. Our technicians have up to experience, and we carry the full service arc: chimney sweep, Level 2 Inspection, and repair under one provider. Call (855) 508-5717 to book a sweep and get a written estimate before any work begins.
Why Lafayette Residents Choose Us for Gelco Service
Gelco inserts show up on both sides of Lafayette, and the symptoms look similar until you open the firebox. A lazy flame in a newer subdivision insert often traces to a blocked intake or a tired gasket. The same symptom in an Old Town insert often traces to a flue that’s simply too big for the unit. We test before we recommend, so the fix matches the cause.
We source through Copperfield and Olympia Chimney for traceable, quality-controlled components, and we use OEM Gelco parts for critical pieces like firebox panels, gaskets, and vent kits when they’re available. For caps, dampers, and general hardware, quality aftermarket parts are fine and often the right call. Scheduling is straightforward: we book the visit, we tell you what we found, and we put it in writing.
Serving Lafayette means knowing which neighborhoods need which approach. That’s the whole job here.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Lafayette
These are the Gelco issues we run into most often around Lafayette, and why the local conditions make each one worse:
- Blocked intake or exhaust on direct-vent inserts. Gelco direct-vent gas inserts in the 1990s and 2000s subdivisions east of downtown collect debris and insect nests in the vent path. The result is a weak flame, a flame that shuts down, or a pilot that won’t hold. Front Range freeze-thaw swings push the nesting season and the debris load, so a few seasons can be enough. Cleaning the vent path and testing draft is the first step.
- Cracked refractory panels and warped baffles. Gelco prefab wood-burning fireplaces take heavy use through the US 287 corridor’s concentrated burning season. Cracked refractory panels and warped baffles show up after a few hard winters. These are structural concerns, not cosmetic ones, and they change how the unit should be used until repaired.
- Degraded flue collars and gaskets. Freeze-thaw cycling wears Gelco insert flue collars and gaskets faster than a stable climate would. When they degrade, downdraft and smoke spillage show up on windy foothills days. Replacing worn gaskets restores the seal.
- Oversized unlined flues behind Old Town retrofits. Gelco inserts retrofitted into coal-era brick chimneys near South Boulder Road can sit inside an unlined flue far larger than the insert was designed for. The insert’s draft can’t pull against that volume. Creosote builds faster and downdraft gets worse. A sweep alone won’t fix it.
- Creosote buildup between annual sweeps. When a Gelco insert is undersized for its flue or running with a worn gasket, incomplete combustion lays down creosote faster. That raises the chimney fire risk. A camera inspection shows you exactly how much is there.
Gelco Service in Lafayette: What Local Conditions Mean for Your Equipment
The split in Lafayette runs along housing age. In Old Town, around Public Road and South Boulder Road, the pre-war brick bungalows and Victorians were built with chimneys designed for coal. Many are unlined or have clay-tile flues sized for a coal fire, not a wood insert or a gas unit. A Gelco insert installed in one of those chimneys faces a flue it wasn’t designed to work with. The insert’s fan-assisted draft has to fight the volume of an oversized, unlined brick chase. On windy days off the foothills, the result is smoke rolling back into the room. On cold starts, it can mean a lazy flame that never gets going.
In the 1990s and 2000s subdivisions on the east side and out toward Coal Creek, the story is different. Those homes have framed construction and prefab metal fireboxes with direct-vent inserts, and the flues are sized to match. The service call there is usually about clearing the vent path and replacing a worn gasket, not rethinking the whole flue. The point is that a Gelco insert in Lafayette needs an inspection that asks which kind of chimney it’s sitting in before anyone picks up a brush.
Gelco Models & Products We Service in Lafayette
We handle three kinds of Gelco equipment in Lafayette. Gelco direct-vent gas fireplace inserts are the most common in the newer subdivisions; those get the vent path cleaned, the gaskets checked, and a draft test. Gelco prefab wood-burning fireplaces with a metal firebox get the firebox itself inspected for cracked refractory panels and warped baffles, along with a full creosote sweep. Gelco fireplace inserts with multi-flue cap systems get the cap and the flue connections checked for debris, corrosion, and seal problems.
On parts, we use OEM Gelco components for critical pieces like firebox panels, gaskets, and vent kits when they’re available. For caps, dampers, and general hardware, quality aftermarket parts do the job. We also work with DuraFlex flexible liner systems when relining is the right answer, and HeatShield when a flue needs resurfacing instead of replacement.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Lafayette
Pricing in Lafayette works per job, and the written estimate sets the final price. A standard chimney sweep and a Level 2 Inspection are quoted separately from any repair work. What drives cost on a Gelco insert here:
- The type of chimney: a prefab direct-vent in a newer subdivision is usually simpler than a coal-era brick flue in Old Town.
- Access to the vent path and whether a camera inspection is needed to see it.
- Whether gaskets, firebox panels, or a vent kit need replacing.
- Whether the flue is oversized for the insert and needs a liner or resurfacing.
Every estimate is free and includes a camera inspection and a photo report, so you can see what we see before you agree to anything. If a repair can safely wait, we say so. Call (855) 508-5717 for an exact quote on your Lafayette Gelco insert.
Serving Lafayette, CO – Our Local Coverage Area
We serve Lafayette and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Lafayette
A blocked intake, a degraded gasket, or both. Cold starts are when the insert’s draft is weakest, so any restriction shows up first then. We clean the vent path, test draft, and replace worn Gelco gaskets if that’s the cause. Call (855) 508-5717 for a free estimate.
Yes, and we assess the flue size before we sweep. Old Town coal-era brick chimneys were built for coal, not wood inserts, and many have oversized unlined flues. A standard sweep won’t correct a flue that’s too large for the unit. We inspect the setup first and tell you what’s actually needed.
Annually, before burning season. Lafayette’s concentrated wood-burning season along the US 287 corridor loads these fireboxes hard, and cracked refractory panels or warped baffles get worse with use. An annual Level 2 Inspection catches them early. Call (855) 508-5717 to book one.
Usually the chimney, not the insert. Foothills downdrafts, an oversized flue, or a degraded flue collar all push smoke back into the room. A camera inspection tells us which. Call (855) 508-5717 for a free estimate.
We repair when the firebox is solid and replace when it’s structurally compromised or obsolete. Critical parts like firebox panels and gaskets use OEM Gelco components when available. Call (855) 508-5717 and we’ll quote it after inspection.
Service Areas Near Lafayette
We serve homeowners across Lafayette and the surrounding communities, including Lafayette, Louisville, Superior, Twin Lakes, Berkley, and Arvada. If your Gelco insert sits in any of these towns, the same housing split and climate conditions apply. Call (855) 508-5717 to book a visit.
Book Your Gelco Service in Lafayette Today
Whether your Gelco insert sits in an Old Town brick chimney or a newer subdivision prefab, we’ll inspect it, name what we find, and fix it with the right product. Call (855) 508-5717 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Written by the team at Arvada Chimney Cleaning.