Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Arvada, CO
We provide independent HeatShield service across Arvada, CO, and the one thing that sets our work here apart is that we start with the masonry, not the liner. Arvada’s original clay-tile flues sit under crowns and mortar joints that Front Range freeze-thaw has already worked over, so the crown and waterproofing repair usually come first and the liner decision comes last. Our technicians have up to experience with cast-in-place relining, and we treat HeatShield as one honest option among several rather than the answer to every flue. Call (855) 508-5717 for a free estimate.

Why Arvada Residents Choose Us for HeatShield Service
HeatShield is a cast-in-place flue relining system, not a sweep company. The liners get installed by independent chimney professionals who’ve been trained on the pour-in-place process and carry the specialty equipment to do it right. Our technicians have up to experience working with that process on Arvada’s mix of original masonry fireplaces and newer factory-built chimneys.
We’re an independent shop. Arvada Chimney Cleaning has no authorization, partnership, or warranty relationship with HeatShield, and we say so plainly because it matters to a homeowner deciding who to call. We work with HeatShield relining as one option and can name the cases where a stainless liner or a rebuild is the better answer. One company for the sweep, the inspection, and the repair means no handoffs and no gaps. That’s how we handle HeatShield work across Arvada.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Arvada
Most of what we correct in Arvada isn’t the liner itself. It’s what happened around the liner before or after it went in.
- A liner poured over a shifted tile. Clay-tile flues in 1950s-70s Arvada ranches crack and offset from freeze-thaw cycling. If the flue isn’t prepped correctly before the pour, the HeatShield section can end up thin or partially blocked. We camera the flue first and correct the tile before any compound goes down.
- Efflorescence and spalling at the crown. Chinook drying winds and summer hail drive water into crown edges and mortar joints. HeatShield-surfaced flues in Arvada often show that water damage at the crown before the liner ever fails, which is why crown work leads the job.
- Heavy creosote masking a breach. In older neighborhoods near Olde Town and along Ralston Road, homeowners still burn wood hard through winter inversions, and slow fires leave glazed creosote that hides cracked tiles. A resurfacing job attempted without a Level 2 camera inspection can miss a hidden breach underneath.
- HeatShield promised on the wrong flue type. Factory-built metal chimneys on newer west-side and transit-oriented builds generally don’t accept HeatShield, because the system is a masonry solution. A sweep who promises a HeatShield liner on a metal chimney has the wrong product.
- Crown and joint repair skipped in favor of a liner. Where mortar, tuckpointing, or a quality aftermarket cap will fix the problem, an honest provider repairs instead of relining. We’ll tell you when the flue can safely wait.
HeatShield Service in Arvada: What Local Conditions Mean for Your Equipment
Arvada’s older neighborhoods sit on clay soils and took on water during the 2013 flood. Combine that flood-era moisture intrusion with Front Range freeze-thaw, and a lot of original masonry chimneys here already have compromised crowns and mortar before anyone talks about the flue interior. That’s the local reality that shapes every HeatShield decision in Arvada: relining almost always starts with crown and waterproofing repair, not the liner alone.
Pour a cast-in-place liner into a chimney that’s still taking water at the crown and you’ve sealed moisture inside masonry that needs to dry. Worse, in the older streets around Olde Town, glazed creosote from slow winter fires can mask a cracked tile so the flue looks sound when it isn’t. We do a Level 2 camera inspection, show you the footage, repair the crown and joints, waterproof the masonry, and only then decide whether HeatShield is the correct fix. Sometimes it’s a stainless liner. Sometimes it’s a rebuild. We say which, and we show why.
HeatShield Models & Products We Service in Arvada
We work with the HeatShield product line as it’s actually used in Arvada homes: HeatShield Original for unlined masonry flues, the HeatShield Resurfacing System for damaged clay-tile flues, CrownSeal and CrownSeal crown products for crown repair and coating, and the joint-repair and spall-repair compounds for mortar and tile damage. HeatShield compounds are proprietary, so the right material is the HeatShield system itself, not a generic substitute. We choose the product to fit the flue we actually found with camera evidence, and we source professional-grade materials through Copperfield and Olympia Chimney when the job needs them – traceable components, not whatever’s on a hardware shelf. In a typical Arvada ranch or split-level with an original clay-tile flue, a homeowner notices a smoky draft or a cracked tile from the inspection, and the flue turns out to have offset tiles plus a spalled crown. Clean, repair, waterproof, then evaluate the liner. That order matters.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Arvada
HeatShield work is priced per job by a written estimate. The estimate is free, and the written number is what you pay.
- Level 2 camera inspection with photo report: quote per job, included as part of the relining estimate.
- Crown repair and coating: quoted per crown.
- Chimney waterproofing: quoted by masonry square footage.
- HeatShield cast-in-place liner: quoted by flue size, height, and prep work required.
What drives the number is the condition of the flue, the amount of prep, whether the crown and joints need repair first, and the flue’s dimensions. Nothing gets recommended without camera evidence you can see for yourself, and we’ll say when work can safely wait. Call (855) 508-5717 for an exact quote – estimates are free.
Serving Arvada, CO – Our Local Coverage Area
We serve Arvada and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Arvada
Often yes, but only after inspection confirms the tiles are sound enough to prep, and only after the crown is addressed. Clay-tile flues in Arvada’s 1950s-70s ranches frequently have offset or cracked tiles from freeze-thaw, so the qualification depends on the camera footage, not the age of the house. Call (855) 508-5717 to book an inspection and get a written answer.
Because the crown isn’t the liner. Chinook drying winds and summer hail drive water into crown edges and mortar joints, and a HeatShield-surfaced flue will keep showing efflorescence and spalling at the crown until the crown and masonry are repaired and waterproofed. Relining doesn’t fix water intrusion at the top. Call (855) 508-5717 for a crown assessment.
Not by itself. Heavy glazed creosote from slow winter fires near Olde Town and along Ralston Road needs a proper sweep first, because the creosote can hide a cracked tile. Only after the flue is cleaned and camera-inspected should anyone decide whether HeatShield is warranted. Call (855) 508-5717 for a sweep and Level 2 inspection.
Yes, once the masonry is dry and the crown and joints are repaired. Pouring a cast-in-place liner over masonry still holding flood-era moisture traps water inside the chimney and leads to spalling later. The order is inspect, repair, waterproof, then decide on the liner. Call (855) 508-5717 to schedule an inspection.
We can’t promise a HeatShield manufacturer warranty because Arvada Chimney Cleaning is an independent provider with no warranty relationship with the manufacturer. Ask us in writing what the installation covers before you book, and get the answer on the estimate. Call (855) 508-5717 for a free estimate and a clear written scope.
Service Areas Near Arvada
We serve homeowners across Arvada and nearby communities, including Berkley, Twin Lakes, Superior, Louisville, and Lafayette. If your chimney sits in one of these areas, call and we’ll confirm scheduling and a written estimate.
Book Your HeatShield Service in Arvada Today
If your Arvada chimney has a cracked crown, a smoky draft, or a flue you’re not sure about, start with a Level 2 inspection and a free written estimate. Call (855) 508-5717. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. Our technicians have up to experience.
Written by the team at Arvada Chimney Cleaning.