Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Erie, CO
We provide independent HeatShield service across Erie, from ceramic polymer liner assessment to resurfacing and crown repair. The thing that shapes our HeatShield work here is the wind: homes on the open west side of town load their caps and crowns with grit long before the flue itself needs attention, so our inspections start at the top of the chimney. HeatShield is a flue resurfacing system, and we treat it as exactly that – a named, proven repair material we evaluate honestly. Our technicians have up to experience. Call (855) 508-5717 to book.

Key Takeaways
- We’re an independent HeatShield service provider – not affiliated with or authorized by the manufacturer.
- HeatShield liner inspection in Erie starts at the cap and crown, because prairie wind packs debris up there first.
- Every free estimate begins with camera evidence you can see for yourself.
- Sweep, inspection and repair from one company – no handoffs between contractors.
Why Erie Residents Choose Us for HeatShield Service
We work on HeatShield systems routinely, which means we know how the coating ages, how it bonds to a clay flue, and when it’s still sound versus when it’s finished. That familiarity is the whole reason to call a specialist. HeatShield repairs fail for predictable reasons – moisture under the coating, a dirty flue before application, a crown that lets water in from above – and we look for those causes rather than jumping to a replacement quote. We source quality parts that fit the system, and we name what we find before we recommend anything.
Scheduling in Erie is straightforward. Call and we’ll book a visit, answer your questions about your chimney, and explain what a HeatShield inspection involves. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our license and insurance are current, and the written estimate sets the final price.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Erie
- Blistered or delaminating ceramic polymer. When HeatShield’s Ceramic Polymer lining system goes over a damp or dirty clay flue, it can bubble and peel. Erie’s freeze-thaw cycles above a masonry crown make that failure show up faster, and we strip and re-prep the flue rather than coating over the damage.
- Hairline cracks and pull-away at tile joints. On resurfaced clay tile liners, over-firing loosens the coating from the joints. Older ranches near Erie’s original downtown core burn wood as a backup heat source through cold snaps, which is exactly the pattern that stresses a coating.
- Creosote hiding behind an uninsulated liner. A HeatShield Heat Shield insulation mix that was skimped or skipped lets the bond fail. When dampers get throttled down on Erie’s freezing nights, creosote collects behind the coating where a sweep never reaches.
- Crown repair material over a spalling crown. HeatShield Crown Repair and Crown Coat materials need a prepped, sound surface. Applied over a spalling crown, they crack and lift within a season, and wind-driven grit on exposed west-facing homes speeds the wear.
- Cap-loading mistaken for a dirty flue. Smoke rolling back on a windy evening often points to a cap packed with dust and shingle grit, not a creosote-choked flue. We check the cap before we sell a sweep.
HeatShield Service in Erie: What Local Conditions Mean for Your Equipment
Erie sits on the wind-scoured High Plains between Boulder and Denver, and that geography changes what a HeatShield inspection actually looks at. On the newer west-facing homes in the subdivisions, caps clog with wind-packed dust, seed fluff and shredded shingle grit faster than the flue accumulates creosote – so a liner inspection here often starts at the cap and crown rather than the flue interior. The persistent northwesterly winds do the loading. Cold nights below freezing do the rest, working freeze-thaw into masonry crowns above HeatShield-coated flues.
In a newer Erie subdivision, a homeowner notices smoke rolling back into the room on a windy evening and assumes the flue is packed. It isn’t. The cap is packed with prairie grit and shingle debris instead. A qualified local pro pulls the cap, runs a Level 2 camera inspection, finds the HeatShield ceramic polymer liner intact but the crown cracked from freeze-thaw, then cleans, repairs the crown and resets the cap. No reline sold. That’s the difference between assessing what’s actually there and quoting from a script.
HeatShield Models & Products We Service in Erie
We service the HeatShield products that show up in Erie’s chimneys: the Ceramic Polymer lining system for masonry flues, the resurfacing system for cracked clay tile liners, the Heat Shield insulation mix used as liner backfill, and the Crown Repair and Crown Coat materials. Each has its own prep and cure requirements, and getting them wrong is why coatings fail early.
For liner and crown work we use genuine HeatShield materials, because the coating chemistry and cure schedule matter to the result. Where the brand adds nothing – a standard cap or a damper – we fit quality aftermarket components that do the job. We’re an independent shop, so our recommendation rests on what the camera shows, not on a product line we’re tied to.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Erie
HeatShield work is priced per job by a written estimate, and the estimate is free. What drives the number is scope: a sweep and Level 2 inspection with camera and photo report sits at the low end, crown repair and cap work in the middle, and resurfacing or relining climbs from there depending on how much clay tile is sound. We won’t quote a liner or crown job before we’ve seen the flue.

Nothing is recommended without camera evidence you can look at yourself, and if work can safely wait a season we’ll say so. If your tiles are structurally sound, resurfacing is worth the money; if the flue is badly spalled or tiles are displaced, relining or rebuilding is the honest answer. Call (855) 508-5717 for a free estimate in Erie.
Serving Erie, CO – Our Local Coverage Area
We serve Erie and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Erie
Most HeatShield-lined flues in Erie call for a Level 2 inspection with camera, especially after a crack, a cap clog or a home sale. A Level 2 goes where a Level 1 can’t reach and documents what’s behind the coating. Call (855) 508-5717 and we’ll book one.
Northwesterly prairie winds pack dust, seed fluff and shredded shingle grit into west-facing caps faster than flues load with creosote. That’s why we check the cap first. Call (855) 508-5717 if you’re seeing smoke roll back on windy evenings.
It depends on the clay tile underneath. Sound tiles with a failed coating can be re-prepped and recoated; badly spalled or displaced tiles mean relining or rebuilding. We camera the flue before we decide. Call (855) 508-5717 for a free estimate.
Yes, if the crown is properly prepped and the material is applied to a sound surface. Applied over a spalling crown, it fails within a season. Wind-driven grit on exposed west-facing crowns speeds the wear, so prep matters. Call (855) 508-5717 to have your crown assessed.
No. HeatShield is a masonry flue resurfacing and lining system, so a factory-built metal flue doesn’t take it. Those flues still need sweeping, inspection and cap work, which we handle. Call (855) 508-5717.
Service Areas Near Erie
We also serve homeowners in Arvada, Berkley, Superior and Twin Lakes, and our HeatShield work reaches into Lafayette and Louisville nearby. If you’re just outside Erie, call and we’ll confirm coverage. Our HeatShield expertise travels with us.
Book Your HeatShield Service in Erie Today
If your chimney has a HeatShield liner, crown repair or resurfacing in its history, get it assessed before burn season. Call (855) 508-5717 for a free estimate in Erie. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Arvada Chimney Cleaning.