G

Gelco Chimney Cleaning Service in Arvada, CO

Gas fireplace serviceGas fireplace service
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Why Arvada Homeowners Choose Gelco Chimney Cleaning

We provide independent Gelco chimney cleaning service in Arvada, CO. That means sweep, inspection, and repair for Gelco fireplaces handled by technicians who work on Gelco equipment regularly and know where it tends to fail instead of treating it like any other firebox. Gelco is a chimney cap, and our Gelco work covers caps, chimneys, and the fireplaces below them. Arvada Chimney Cleaning is an independent service provider. We are not affiliated with or authorized by Gelco. Call (855) 508-5717 and we’ll book a sweep. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

professional chimney inspection service in Arvada, CO

Call (855) 508-5717

Why Trust Arvada Chimney Cleaning for Your Gelco Chimney Cleaning?

Gelco equipment has its own habits, and they show up in predictable places. Dampers stick and warp. Refractory panels crack after enough heat cycles. The smoke chamber on these units collects creosote faster than owners expect because the throat is shallow. A technician who has seen those patterns knows what to look at first. That saves you from a general sweep that never opens the firebox to check the panels.

Our technicians have up to experience, and they handle Gelco fireplaces the way the equipment calls for: careful with gaskets and seals, correct about clearances, and honest about what a repair will and won’t fix. We use quality parts that fit Gelco equipment, and we work in a way that respects the manufacturer’s warranty rather than voiding it through improvised fixes.

We’re a local Arvada service, and we treat the sweep, the inspection, and the repair as one job. You get one company for all three, which matters when the inspection turns up a cracked panel or a failing damper. Nobody hands you a report and disappears. We name what we find, show it to you, and fix it with the right product.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common Gelco Chimney Cleaning Problems We Fix in Arvada

Arvada’s older housing stock shapes what we find on Gelco units. Mid-century ranches and split-levels from the 1950s through the 1970s sit alongside newer west-side and transit-oriented builds, and that mix means original masonry fireplaces and factory-built metal chimneys both turn up on the same street. On the Gelco side, a handful of problems repeat.

  • Warped dampers and corroded hinges in zero-clearance units. The damper blade in a Gelco zero-clearance fireplace takes heat directly and warps over time. Hinges corrode, the blade stops seating, and draft suffers. The first sign owners notice is smoke rolling into the room when they light a fire instead of going up the flue.
  • Cracked or spalling refractory panels in Gelco HC fireboxes. Refractory brick panels are built to take heat cycling, not forever. Hairline cracks are normal; crumbling and spalling are not. Once a panel breaks down, the steel behind it is exposed to temperatures it wasn’t designed for.
  • Heavy creosote in the shallow firebox throat and smoke chamber. The relatively shallow throat and smoke chamber on Gelco fireplaces trap creosote efficiently. Slow-burning fires, common on winter inversion days in Arvada, leave glaze that a brush won’t cut. That glaze is the main fuel for a chimney fire.
  • Rusted or loose multi-flue caps. The cap takes the weather. Loose or rusted multi-flue caps let rain and snowmelt into the flue and give birds and squirrels a way in. On Arvada chimney tops, freeze-thaw cycles and drying chinook winds work on these parts year after year.
  • Water intrusion at the crown and flashing. Arvada’s hail and the moisture that followed the 2013 flood left many older chimneys with cracked crowns and failed flashing. Water gets into masonry, then into cracks, and masonry spalling follows. Waterproofing and crown repair are recurring needs here, not occasional ones.

Down near Olde Town and along Ralston Road, many homeowners burn wood as a primary or secondary heat source through the winter, so we often find heavy creosote glaze plus cracked clay tiles that need relining before the next heating season. Gelco chimneys in that same housing stock deal with the same weather and the same heavy burning.

Gelco Parts & Our Repair-vs-Replace Approach

Critical safety components get the right part. For Gelco dampers and refractory panels we use OEM Gelco parts when they’re available, because a damper that doesn’t match the unit won’t seal, and a refractory panel that doesn’t fit the firebox leaves gaps that defeat its purpose. For caps, flashing, and mortar, quality aftermarket equivalents are fine and often the more cost-effective route. We don’t stock or carry genuine Gelco parts, and we’re not a Gelco dealer. We source what fits your equipment and tell you which kind of part we’re using and why.

Repair is usually the right call on a Gelco unit. The firebox, the damper, and the panels can be brought back into service, and that’s far cheaper than replacement. The exception is structural. If the firebox or the chimney structure itself is compromised, a repair won’t make it safe, and we’ll say so plainly. We don’t rebuild what should be replaced and we don’t replace what can be repaired. Call (855) 508-5717 for a free estimate and we’ll tell you which side of that line your Gelco unit is on.

Our Gelco Service Process – Step by Step

  1. 1
    Diagnosis. Every Gelco job starts with a Level 2 inspection when there’s a known problem or a real estate or insurance requirement. We run a camera through the flue, check the damper for warping and hinge corrosion, inspect refractory panels for cracking and spalling, and look at the cap and crown from the top.
  2. 2
    Creosote removal. We sweep the firebox, throat, smoke chamber, and flue, and we remove glaze that a standard brush won’t touch. You see the camera evidence before we recommend anything past a sweep.
  3. 3
    Repair or install. If the damper is warped or seized, we free it or replace it. Cracked refractory panels get repointed or replaced with parts that fit. Loose or rusted multi-flue caps get reset or replaced, and failed flashing and cracked crowns get addressed so water stays out.
  4. 4
    Test. We check draft after any damper or flue work, confirm the cap seals, and make sure the firebox is safe to use. Smoke rollout that came from a bad damper shouldn’t come back after the fix.
  5. 5
    Documentation. You get the findings in writing and a photo report from the inspection. That’s what your insurer and your buyer’s inspector want to see, and it’s what tells you what to expect next season.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Gelco Products We Service & Install in Arvada

We service and install the kinds of Gelco products Arvada homeowners actually have. That includes the Gelco HC Series prefabricated wood-burning fireplace, the Gelco 36″ Zero-Clearance Fireplace, the Gelco Gas Fireplace Insert, and the Gelco Masonry Firebox with Damper. We also work on Gelco chimney caps and multi-flue caps at the top of the chimney. For each of these we sweep, inspect, and repair, and we can install replacement parts that fit the unit. Gelco’s gas insert work is different from wood-burning cleaning because there’s no creosote to remove from a gas firebox, but the flue, cap, and venting still need inspection. Our other brand partners, DuraFlex and HeatShield, cover the relining and resurfacing side of the job when a Gelco chimney needs more than a sweep.

We Also Service These Brands

We’re not tied to one manufacturer. Alongside Gelco, we work with DuraFlex flexible liner systems for relining and HeatShield for ceramic resurfacing and liner repair. That range means we can recommend the product that fits your chimney instead of forcing one brand onto every job. One company for the sweep, the inspection, and the repair.

FAQs – Gelco Chimney Cleaning Service in Arvada

Book Your Gelco Service in Arvada, CO

Whether you need a sweep before the heating season, a Level 2 inspection for an insurance or real estate request, or repair on a damper or refractory panel, call (855) 508-5717 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One company for the sweep, the inspection, and the repair in Arvada.

Written by the team at Arvada Chimney Cleaning.

Need Chimney Cleaning help nationwide? Licensed & insured · free written estimates
Call (855) 508-5717
Local Service Coverage

Request a Free Estimate in Arvada

Tell us what you need - Arvada Chimney Cleaning responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7