Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Evergreen, CO
Chimney inspection in Evergreen looks different from inspection almost anywhere along the Front Range. Most homes here that burn wood sit on wooded lots above 7,000 feet, which means masonry fireplaces, wood stoves and inserts doing real work from October into April, and creosote loads that flatland sweeps rarely see. Our technicians have up to experience, and we handle the sweep, the inspection and the repair under one provider, using professional-grade parts from Gelco, Olympia Chimney, Famco and Copperfield. Call (855) 508-5717 to book a visit. We answer 24/7.
Why Evergreen Homes Are Different
Evergreen’s cold is the first thing that changes the work. Long winters and constant freeze/thaw swings mean a flue heats and cools hundreds of times a season, and clay tile liners that were fine in 1985 can be cracked now. Add snowpack, ice dams and meltwater running down the chimney top, and you get flashing failures, spalled crowns and spring leaks that show up long after the burning season ends.
The housing stock does the rest. Most homes here are rural and mountain-style single-family houses built from the 1970s into the 1990s, a lot of log and timber-frame construction with mason-built masonry fireplaces plus stoves and inserts added later. Those systems are often decades into service.
Terrain plays a part too. Chimneys high on sloped, tree-shaded lots stay damp and hold snow on the cap well into spring, which encourages moss and speeds up mortar wear. And because much of Evergreen sits in the wildland-urban interface, a documented, clean flue and an intact spark arrestor often matter to an insurer as much as they matter to your stove.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Evergreen Services
Two services bring most Evergreen homeowners to the phone: a sweep when the flue is loaded up, and repair when the freeze/thaw seasons have finally caught up with the chimney.
Chimney Sweep in Evergreen
A sweep here means more than brushing a flue. Constant wood burning through a mountain winter builds creosote fast, and we remove it with rotary tooling sized to your flue, then check the firebox, damper and cap while we’re up there. Snow and ice sitting on the cap and crown get noted before they turn into a leak. We photograph what we find so you can see the flue condition yourself. Book a chimney sweep before the burning season starts. We answer 24/7 at (855) 508-5717.

Chimney Repair in Evergreen
Repair in Evergreen usually comes down to water and thermal cycling. Cracked crowns, failed flashing and spalled mortar are the recurring offenders, and many older homes need relining rather than another sweep. We resurface damaged flues with the HeatShield ceramic system and reline with DuraFlex flexible liner systems, both warrantable, code-compliant solutions rather than improvised patches. Parts come through Copperfield and Olympia Chimney, so components are traceable. Call us about chimney repair and we’ll name what we find, then fix it.

Chimney Inspection in Evergreen

Chimney inspection in Evergreen is mostly a story about time and temperature. Homes built between the 1970s and 1990s have had decades of hard winters and constant wood burning, and the original clay-tile liners in many of them have cracked from repeated freeze/thaw cycles. A proper Chimney Inspection finds that damage before it becomes a chimney fire risk or a carbon monoxide path into the house.
Chimney Flue Inspection
Signs you need it
You need a flue inspection if you’re seeing smoke spilling into the room, a sour or ashy smell in summer, visible cracks or missing mortar in the flue tiles, or if the chimney hasn’t been looked at in a season or more of heavy burning.
What it costs in Evergreen
A flue inspection in Evergreen typically runs $150 – $350, and it’s often bundled with the sweep when both are booked together.
How we do it
We run a camera down the flue, record the full length of the liner, check for cracked tiles, gaps, offset joints and heavy creosote glaze, then hand you a photo report of what the camera saw.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is what you need when a property is changing hands, when an insurer asks for documentation, after a chimney fire or a seismic event, or whenever the flue has been altered or relined.
What it costs in Evergreen
Plan on roughly $250 – $450 for a Level 2 inspection in Evergreen, depending on how much of the chimney needs to be opened up and accessed.
How we do it
We inspect every accessible part of the system, including the attic and crawl space where the chimney passes through, plus the exterior, and we document the findings in a written report with photos.
What Chimney Inspection Costs in Evergreen
| Item | Typical range in Evergreen |
|---|---|
| Standard chimney inspection | $150 – $350 |
| Level 2 inspection with photo report | $250 – $450 |
| Camera inspection add-on | $75 – $150 |
Ranges are typical estimates for the area; the written estimate you receive sets the final price. Homes on steep wooded lots sometimes need extra access work at the top, and that’s the most common reason a quote moves.
Do I need a Level 2 inspection to sell my Evergreen house?
Not by law, but most buyers and many insurers want one. A Level 2 documents the flue, attic pass-through and exterior in a written report with photos, which answers the buyer’s questions before they become a negotiation.
Can a chimney inspection find a chimney fire I didn’t know about?
Often, yes. Chimney fires can burn hot and brief without anyone noticing, leaving cracked tiles, warped dampers or puffy creosote. A camera inspection shows that damage plainly. Call (855) 508-5717 for an exact quote; estimates are free.
Brands We Service in Evergreen
We work with recognized industry brands, including Gelco, Olympia Chimney, Famco and Copperfield, the same supply lines certified chimney professionals use nationwide. Nothing here is a hardware-store substitute. Most standard parts arrive in a few days; specialty components take longer, and we tell you which at booking. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Evergreen, CO
| Service | Typical range in Evergreen |
|---|---|
| Standard chimney inspection | $150 – $350 |
| Level 2 inspection with photo report | $250 – $450 |
| Camera inspection add-on | $75 – $150 |
| Standard chimney sweep | $180 – $320 |
| Sweep plus inspection | $250 – $450 |
| Chimney cap replacement | $150 – $400 |
| Crown repair or rebuild | $300 – $900 |
| Flue relining (DuraFlex) | $1,800 – $4,500 |
| HeatShield flue resurfacing | $1,200 – $3,000 |
| Masonry tuckpointing | $400 – $1,200 |
In Evergreen, price mostly tracks access and condition: chimneys on sloped, tree-shaded lots take longer to reach safely, and long-neglected creosote or cracked liners turn a sweep into a repair. You get the price in writing before any work is booked, and nothing gets added without your say-so.
Neighborhoods We Serve in Evergreen
Evergreen spreads across wooded ridges and valley floors, and the drive between them shapes how a day gets scheduled. We book visits across the 80439 area and the surrounding mountain pockets, and we’ll give you a realistic window when you call. Homes on steep driveways or long unpaved access roads are worth mentioning at booking so we arrive with the right equipment.
- Downtown Evergreen and the Bergen Park area
- Troutdale and the Troutdale-in-the-Pines side
- Brook Forest
- Kittredge and the canyon corridor
- The Ridge at Hiwan and surrounding foothill subdivisions
Service Area – Cities Near Evergreen
Evergreen sits west of the metro, and we also take chimney work in the communities around it. If you’re closer to the flats, our Arvada, CO page covers that ground. South and east of us, we work in Glendale, CO and Berkley, CO. Up the canyon toward the foothills, you’ll find coverage details on our Twin Lakes, CO page. Wherever you are, the process is the same: a booked visit, a documented inspection, and a written price before anything starts.
Serving Evergreen, CO – Our Local Coverage Area
We serve Evergreen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Evergreen
We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. Evergreen visits are typically booked within a few days, and we confirm a window when you call. A call outside dispatch hours is booked into the next opening.
Structural work like a crown rebuild or a full reline often requires a permit from the local building department, and some Evergreen HOAs have their own rules on exterior changes. We’ll tell you what applies before we schedule the job.
Creosote keeps stacking up, and in a mountain climate with heavy burning it can glaze into a hard, flammable layer. That raises chimney fire risk and narrows the flue. A sweep costs far less than the repair that follows. Call (855) 508-5717 for a free estimate.
Whether your chimney needs a sweep, a documented inspection for a sale, or a reline after decades of freeze/thaw, it’s one call to get it looked at properly. We name what we find, show you the evidence, and fix it with the right product for the job. Call (855) 508-5717 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Evergreen Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Keisha Ingram"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Neil Anderson"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Beatriz Morales