Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Gunbarrel
If your chimney is pulling apart at the mortar joints, letting water in through a cracked crown, or your wood stove flue is coated with tar-like creosote, we handle the repair. We work on Gunbarrel homes directly, from the subdivisions off Lookout Road and 63rd Street to the semi-rural lots on acreage east of town. Gunbarrel sits at the foot of the Front Range in unincorporated Boulder County (ZIP 80301), and the chimneys here take a beating from wind and long winters. Call (855) 508-5717. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most masonry repairs in Gunbarrel run $350 to $2,500; a full rebuild costs more and is quoted in writing first.
- Wood stoves used as primary heat need more frequent sweeping than occasional-use fireplaces.
- We use HeatShield, DuraFlex, and professional-grade parts from Copperfield and Olympia Chimney.
- Every repair starts with an inspection, so you see the problem before anyone quotes a fix.
Why Gunbarrel Homeowners Call Arvada Chimney Cleaning for Chimney Repair
Gunbarrel is a small community where a lot of the housing stock was built between the 1970s and 1990s, and plenty of those homes still have their original masonry fireplaces or a wood or pellet stove added later. We know that mix. We also know the strong downslope winds that funnel off the Flatirons and drive rain and snow sideways into flues, which is why so many Gunbarrel chimneys show water damage and spalling before they show anything else.
Our technicians have up to experience, and they work the same supply lines certified chimney professionals use nationwide. When we find a problem, we name it and fix it with the right product – HeatShield for resurfacing and liner repair, DuraFlex for relining, and parts sourced through Copperfield and Olympia Chimney. No hardware-store substitutes, no improvised patches.
You get one company for the sweep, the inspection, and the repair. No handoffs, no gaps, and no wondering whether the findings will actually get fixed. For Gunbarrel properties on acreage, that matters. We’d rather do the work right than drive back out twice.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Repair Companies in Gunbarrel
Chimney Repair Companies serving Gunbarrel get called for two very different kinds of work: standard fireplace fixes in the subdivisions and heavier restoration on rural-edge properties where a wood stove carries the heat load all winter. The job usually starts with an inspection, because you can’t price a repair until you know what’s failed. From there it moves to the actual masonry or flue work. A typical repair in Gunbarrel runs $350 to $1,200 for localized fixes like crown repair or flashing, and $1,500 to $2,500 when a liner or smoke chamber needs resurfacing.
What a Repair Visit Covers
A visit includes a look at the firebox, damper, smoke chamber, flue, crown, cap, and flashing. If the flue is glazed or the liner is compromised, the technician explains what needs to happen and why before any work is booked. You get a written estimate on the spot.
When a Repair Becomes a Rebuild
Sometimes the damage is structural, not cosmetic. Cracked or shifting masonry above the roofline, a chimney that’s pulling away from the house, or a firebox that’s failed through its full thickness can push the job into rebuild territory. We say so plainly when that’s the case, and we say so when it isn’t.
Learn more about our full chimney repair services.
Chimney Masonry Repair in Gunbarrel
Chimney Masonry Repair in Gunbarrel is mostly about the freeze-thaw cycle. Cold nights, heavy snowmelt, and wind-driven moisture work on brick and mortar all winter, and the original chimneys on 1970s and 1980s homes here were not built for four decades of that without attention. Mortar joints crack, brick faces spall, and water gets behind the flashing. Repointing and tuckpointing a typical Gunbarrel chimney runs $500 to $1,500 depending on height and how much of the stack needs work.
Repointing and Tuckpointing
We grind out the failed mortar to a proper depth and pack in new material that matches the brick, not a smear over the top. Tuckpointing is the same idea on a smaller scale, for isolated joints that have opened up. Both stop water from tracking into the wall cavity.
Spalling Brick and Waterproofing
When brick faces flake or pop off, the brick itself is failing, not just the mortar. Those units get replaced, then the whole stack gets a breathable waterproofing treatment. Waterproofing a chimney in Gunbarrel runs $300 to $700 and is the cheapest thing you can do to slow future masonry damage.
Trusted Brands We Service in Gunbarrel
We work with recognized industry brands because they hold up and because the parts are traceable. DuraFlex flexible liner systems give Gunbarrel homeowners a documented, warrantable relining solution instead of a temporary fix. HeatShield is a ceramic resurfacing system designed to restore flue integrity, and it’s a named, proven product, not an improvised patch. Parts come through Copperfield and Olympia Chimney, professional supply chains with quality-controlled components. We don’t claim to stock these locally – we source what the job needs and schedule the work around it. That keeps turnaround tight without cutting corners on materials.
Common Chimney Repair Problems We See in Gunbarrel Homes
- Glazed third-degree creosote in wood stove flues. Rural-edge homes burning wood as primary heat build tar-like deposits fast, and a standard brush won’t touch them. This needs chemical treatment, not a sweep-and-leave.
- Wind-driven water damage in uncapped flues. The downslope winds off the Flatirons push rain and snow sideways into open flues, spalling the firebox and rusting dampers until they stop sealing.
- Cracked crowns and failed flashing on original masonry. Chimneys built in the 1970s through 1990s are showing cracked crowns and pulled flashing now, and the water intrusion that follows weakens the flue liner and draft.
- Overfired fireboxes and warped dampers. Stoves pushed hard through a long heating season can warp the damper and crack firebox bricks. A Level 2 inspection catches it before it becomes a rebuild.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Gunbarrel, CO
Pricing here reflects the work: masonry repair in Gunbarrel typically runs $350 to $1,500 for repointing, crown repair, or flashing, and $1,500 to $2,500 when a liner or smoke chamber needs resurfacing with HeatShield or a DuraFlex reline. A full chimney rebuild costs more and is always quoted in writing before anyone starts. What moves the number is height and access, how much of the stack is affected, whether the flue is glazed, and whether wind-driven water damage has reached the liner. The estimate is free, and the written estimate sets the final price. Nothing gets recommended without evidence you can see for yourself. Call (855) 508-5717 for an exact quote – estimates are free.
We Also Serve Cities Near Gunbarrel
We serve homeowners across Gunbarrel and the surrounding communities, including Louisville, Lafayette, Erie, and Superior. The same inspection-first approach and the same professional-grade materials go into every job, whether it’s a subdivision fireplace or a rural wood stove on acreage.
Serving Gunbarrel, CO – Our Local Coverage Area
We serve Gunbarrel and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Gunbarrel
Once a year is not enough if your wood stove is your main heat source in Gunbarrel – plan on a mid-season check in addition to the annual sweep. Extended heating seasons and wind-driven creosote buildup mean deposits accumulate fast, and many rural households reach glazed third-degree creosote by mid-winter. We recommend booking the annual sweep before the season starts and a follow-up once the stove has run hard for a few months. Call (855) 508-5717 to schedule.
Glazed third-degree creosote forms when a wood stove burns hot and slow over a long, cold heating season, and in Gunbarrel the downslope winds stretch that season out. The tar-like coating bonds to the flue and a standard brush can’t remove it. Repair starts with a Level 2 inspection to assess the liner, then rotary cleaning or chemical treatment for the glaze, followed by any masonry repair to the firebox and smoke chamber. Call (855) 508-5717 to book an inspection.
Uncapped flues take in rain and snow driven sideways by the Chinook-style downslope winds off the Flatirons, and that moisture spalls the firebox and rusts dampers. A cap is one of the cheapest repairs you can make and one of the most effective. Once water is in, the flue liner and draft suffer next. Call (855) 508-5717 for a cap and crown assessment.
Most chimney repairs in Gunbarrel call for a Level 2 inspection, because it covers the flue liner and the parts you can’t see from the firebox. A Level 1 is a basic annual check for a chimney in good shape. A Level 3 is for serious structural problems or a change in fuel type, and it opens up concealed areas. We’ll tell you which applies once we’ve seen the chimney. Call (855) 508-5717 – estimates are free.
Often, yes. A cracked firebox or rough smoke chamber in a 1970s or 1980s Gunbarrel home can usually be resurfaced with HeatShield or repaired with refractory mortar rather than torn down. A full rebuild is only necessary when the masonry itself is structurally failing or the firebox has failed through its full thickness. The inspection tells you which side of that line you’re on. Call (855) 508-5717 to find out.
What Happens When You Call
We book a visit, inspect the chimney, and give you a written estimate before any repair starts. If the work can safely wait, we’ll say so. If it can’t, we’ll explain exactly what’s wrong and what fixing it involves. One company for the sweep, the inspection, and the repair. Call (855) 508-5717 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Arvada Chimney Cleaning.