Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Arvada Homeowners Choose DuraFlex Chimney Cleaning
We provide independent DuraFlex chimney cleaning, inspection and repair in Arvada. Our technicians have up to experience and work on DuraFlex installations across the city; they’re independent, so what goes in the written report comes from what your liner actually looks like. We are not authorized, sponsored or endorsed by DuraFlex. We sweep, inspect and repair DuraFlex liners and their components with quality parts that fit them, and every job starts with a camera inspection and a written estimate.

DuraFlex makes one kind of product: a flexible stainless steel chimney liner. In Arvada that means a liner that has to handle real Front Range conditions, and the calls we get reflect it.
Why Trust Arvada Chimney Cleaning for Your DuraFlex Chimney Cleaning?
DuraFlex is one of the most common stainless liners in Front Range homes. We’ve inspected, swept and repaired enough of them to know how they behave: what the insulation blanket does after a few seasons, how a tee sits at the bottom of a run, how a top plate weathers on a chimney crown in Arvada. That is our qualification here. Not a badge from the manufacturer. A pile of liners opened up and looked at.
We treat your liner as a system rather than a pipe. The liner itself, the insulation blanket around it, the tee, the cap and the top plate all have to work together for the clearances the liner was listed with. When one of those pieces fails, the whole run stops performing the way it should. We repair with factory-style components: correct-diameter tee caps, top plates, insulation blankets and appliance connectors that match the liner’s listed clearances rather than a universal part that almost fits.
Our service is also warranty-safe. Nothing we do to a DuraFlex run involves cutting, drilling or altering the liner in a way that would void a manufacturer warranty. When you’re choosing an independent shop, that matters. We’re not a DuraFlex dealer, and we don’t claim to be factory-certified. We’re an independent provider working on DuraFlex equipment. The assessment is honest because there’s no sales sheet behind it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Fix in Arvada
Every liner type has its own failure patterns. These are the ones we run into most often on DuraFlex installs in Arvada, and why they happen.
- Insulation blanket tearing, sagging or dropping off. On an insulated DuraFlex run, the blanket is what gives the liner its zero-clearance rating. When it sags or tears, it does two things at once: your clearance protection drops and creosote starts building in the gap between the liner and the flue wall. A smoky smell in the room with no fire lit is a common sign.
- Tee and cap connection leaks. A loose tee cap or a top plate that wasn’t properly secured lets water and debris into the flue. Water rusts the liner, stains the crown, and in Arvada’s freeze-thaw cycles the moisture behind it does more damage each season than the original leak did.
- Crushed or kinked liner sections at offsets. Flexible liners get pulled tight around a bend during installation. Pull too hard and the section narrows, restricting draft and creating a spot where creosote collects. The draft problem shows up as smoky start-ups.
- Fastener and joint failures. Short-screwed joints, missing sheet-metal screws and corroded terminations let a liner shift. A shifting liner means smoke coming back into the room instead of going up the flue.
- Creosote glaze on a slow-burning setup. DuraFlex runs in older Arvada homes with original masonry fireplaces often see heavy glaze, not light fluff. That calls for a proper mechanical sweep, not a quick pass with a brush.
A typical Arvada job looks like this: a homeowner with a DuraFlex Pro insulated liner calls after a winter of smoky start-ups and a sooty smell in the room. A Level 2 inspection usually shows the insulation blanket has sagged and pulled away, or the top plate and tee cap have come loose and let water in. The usual fix is to clean the full flue, re-secure or replace the cap and blanket, and reseal the top. Where the liner itself is crushed or rusted through, a qualified local pro will price a new run instead of patching a compromised system.
DuraFlex Parts & Our Repair-vs-Replace Approach
For DuraFlex equipment, we use factory-style replacement components: correct-diameter tee caps, top plates, insulation blankets and appliance connectors. We don’t stock OEM or genuine DuraFlex parts, and we don’t carry a parts inventory in a warehouse. What we do is match the part to the liner you have so the clearances that liner was listed with stay intact. A universal cap that “fits” a DuraFlex tee often doesn’t seal the same way.
Repair versus replace comes down to the condition of the liner body itself.
- Repair when the liner is intact and only the termination or blanket is compromised. A new cap, tee, top plate or blanket is the honest call.
- Replace the run when the liner is crushed, rusted through, or the blanket has failed along its whole length. Patching that is a short-term spend that fails again by the next heating season.
We give you the camera photo evidence with the recommendation so you can see the condition for yourself. Nothing is recommended without it. If work can safely wait a season, we’ll tell you that too. Call (855) 508-5717 for a written estimate.
Our DuraFlex Service Process – Step by Step
- 1
Diagnosis. We start with a Level 2 inspection. The camera goes up the flue to look at the liner body, the blanket, the joints and the termination. We check the top plate and tee cap at the same time, because those are where most of the water trouble starts.
- 2
Repair or install. If the blanket needs re-securing or replacing, that’s the job. If a top plate or tee cap needs to come off, we match the replacement to the liner’s diameter and clearances, not to whatever’s closest on a shelf.
- 3
Test. After the work, we check draft and run a smoke test to confirm smoke is going up the flue, not back into the room. We photograph the finished job for your records.
- 4
Warranty and documentation. You get the inspection report, the photos and the written estimate for any recommended work. That paperwork matters if you’re selling the Arvada property or answering an insurer’s question.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Products We Service & Install in Arvada
We service and install the DuraFlex product types you’ll find in Arvada homes:
- DuraFlex SW (single-wall stainless) flexible relining kits. Common on straightforward wood-burning runs where a single-wall liner was the right match for the appliance and flue.
- DuraFlex Pro (double-wall / insulated) flexible liner systems. The insulated runs are where the blanket condition matters most, and where we spend the most inspection time.
- DuraFlex direct-vent and gas appliance liner kits. Gas liners have their own service needs, including venting checks and the annual work an appliance requires.
- DuraFlex flexible liner components. Top plates, tees, caps and insulation blankets, all of which are repair and replacement items.
We Also Service These Brands
While we’re a DuraFlex specialist in Arvada, we’re not a single-brand shop. We also service HeatShield chimney resurfacing and liner repair systems, and Gelco liners. We repair and reline across these brands, and we don’t push one brand over another just because we happen to carry it. If your system is HeatShield, Gelco or DuraFlex, the inspection finds the problem and the written estimate names the right fix.
FAQs – DuraFlex Chimney Cleaning Service in Arvada
No. We are an independent DuraFlex service provider. We are not authorized, sponsored or endorsed by DuraFlex. That independence is the point: our assessment is based on what the liner in your chase actually looks like, not on a brand sales sheet. We repair and install DuraFlex equipment with parts that fit it.
Yes. We use factory-style replacement components: correct-diameter tee caps, top plates, insulation blankets and appliance connectors that match the liner’s listed clearances. We don’t use universal aftermarket parts that don’t seal the same way, and we don’t claim to stock OEM or genuine DuraFlex parts.
Smoke smell in the room with no fire burning usually means the insulation blanket has sagged or pulled away from the liner, or the top plate and tee cap have come loose and let smoke and moisture into the gap between the liner and the flue. A Level 2 inspection will show which. Call (855) 508-5717 for a free estimate.
Yes. A DuraFlex liner is cleaned with standard chimney sweeping tools, but the sweep should also include a look at the blanket, tee and top plate, because those are the components that fail on DuraFlex runs. A plain brush pass doesn’t tell you if the blanket is intact.
It depends on the liner body. If the liner is intact and only the termination or blanket is compromised, repairing the cap, tee or blanket is the honest call. If the liner is crushed, rusted through or the blanket has failed along its whole length, replacing the run is the better long-term spend. We show you the camera evidence either way.
A sweep and inspection on a DuraFlex run usually takes a couple of hours on site. Repair work and relining are longer, and the written estimate sets out how long the job will take before we book it. Call (855) 508-5717 for a free estimate so we can size your job.
We cover DuraFlex SW single-wall flexible relining kits, DuraFlex Pro double-wall insulated flexible liner systems, DuraFlex direct-vent and gas appliance liner kits, and the components: top plates, tees and insulation blankets. We’re an independent service provider, not a DuraFlex dealer.
Proper service should not void a DuraFlex warranty. We don’t cut, drill or alter the liner in a way that would breach the manufacturer’s terms, and we give you the inspection report and photos to keep. Read your own warranty terms, and ask us if you’re unsure.
No. A direct-vent gas liner doesn’t see the creosote a wood-burning liner does, so it doesn’t need the same annual sweep. It does need its venting checked, its terminations inspected, and its appliance looked at each year. We’ll tell you what your setup actually needs.
A DuraFlex liner that has lost its insulation blanket may not hold the zero-clearance rating it was installed with. The blanket is what protects the surrounding structure. A Level 2 inspection with photos will show whether the blanket needs re-securing or replacing. Call (855) 508-5717 for a free estimate.
A DuraFlex sweep and inspection in Arvada is set by the written estimate after we’ve seen your setup. The estimate is free. The price depends on the flue, the liner condition and whether repair work is needed. Call (855) 508-5717 for an exact quote. Estimates are free.
Book Your DuraFlex Service in Arvada, CO
One company for the sweep, the inspection and the repair on your DuraFlex run. We name what we find and fix it with the right part. Call (855) 508-5717. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Heavy creosote in Arvada’s older ranches near Olde Town and along Ralston Road is worth a look before the next heating season starts, so book a sweep and an inspection now.
Written by the team at Arvada Chimney Cleaning.