Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Arvada Homeowners Choose HeatShield Chimney Cleaning
We provide independent HeatShield chimney cleaning and repair service in Arvada, CO. What makes our HeatShield work different is the order we do it in: we fix the water problem first, then resurface, because a HeatShield coating applied over a wet or dirty flue will fail no matter how well it’s installed.

HeatShield is a ceramic flue resurfacing system, and in Arvada it’s often the right answer for a clay-tile flue that has cracked but not collapsed. Our technicians have up to experience working around these cured liners, and we handle the whole arc: the sweep, the inspection, and the repair.
We’re an independent HeatShield service provider. Arvada Chimney Cleaning is not affiliated with or authorized by HeatShield, and we don’t present ourselves as a dealer. We evaluate the product on its own merits. Call (855) 508-5717 for a free estimate.
Why Trust Arvada Chimney Cleaning for Your HeatShield Chimney Cleaning?
HeatShield is a proprietary system. The material cures to a specific thickness and needs a properly prepared substrate to bond, which is why there’s no legitimate generic substitute for a professional HeatShield application. Our familiarity comes from repeatedly working alongside HeatShield-cured liners, not from any manufacturer certification or endorsement.
That matters for your warranty and your safety record. When we service HeatShield equipment, we use quality parts that fit it, we follow the curing requirements the system calls for, and we document what we did so your next inspection has something to reference. We don’t improvise a patch and call it a resurfacing.
We also handle the parts around the flue that decide whether a HeatShield repair lasts: rain caps, crowns, and flashing. Repair work uses parts sourced through Copperfield and Olympia Chimney, professional supply chains with traceable components. That’s a different standard from whatever a hardware store happens to stock.
And because we’re independent, we can tell you honestly when a HeatShield resurfacing is the right call in your Arvada home and when a firebox rebuild or relining is the smarter investment. Being able to say no is worth something.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Fix in Arvada
Most HeatShield failures we see in Arvada trace back to one of two things: the flue wasn’t ready when the coating went on, or water got behind it afterward. Here are the patterns.
- Cerfractory flue sealant delaminating from the clay tile. This is the most common one. If the flue wasn’t fully cleaned of glazed creosote or soot before application, the sealant bonds to the deposit instead of the tile and eventually peels away in sheets. In Arvada’s older ranches, where heavy glaze builds up from slow-burning fires through winter inversions, this is easy to miss on a quick sweep.
- FireGuard coating cracking or blistering over the firebox. FireGuard resurfacing fails when the firebox was still spalling or had active moisture intrusion at the time of application. The coating can’t hold to masonry that’s still moving or wet, so it blisters, then cracks along the failure lines.
- Hairline cracks in the resurfaced smoke chamber at the damper frame. The transition from smoke chamber to damper frame is where the geometry changes and where original mortar often wasn’t fully ground out. HeatShield material laid over leftover mortar will crack at that seam within a few heating seasons.
- Premature failure from a missing or damaged rain cap. A cap that’s gone or bent lets water track behind the coating. Once it freezes, the coating lifts. Arvada’s freeze-thaw cycles do this quickly, and a repair that would have lasted can fail in a single winter.
- Cracked or spalled clay tiles under a sealed flue. Sometimes the sealant did its job and the tiles underneath still cracked from freeze-thaw or from the original fire that started the problem. When we scope the flue we can see whether the substrate is sound or was already compromised before the sealant went on.
HeatShield Parts & Our Repair-vs-Replace Approach
HeatShield repairs need genuine HeatShield materials, applied by professionals trained in their curing and thickness requirements. We don’t stock HeatShield OEM parts and we don’t claim to be a dealer. We do use the correct materials for the system and quality parts that fit it.
The repair-or-replace call comes down to the substrate. If the flue tiles are cracked but intact and the firebox masonry is sound, a HeatShield resurfacing is a documented, replicable repair and usually the right answer. If the tiles are structurally crushed or the firebox masonry is deeply spalled, coating over a failing substrate is just hiding it. In those cases we’ll tell you plainly that rebuilding or relining is the smarter spend. Relining work uses DuraFlex flexible liner systems when a full liner is the answer.
We name what we find and fix it with the right product for the job. Call (855) 508-5717 and we’ll walk you through what a proper assessment involves.
Our HeatShield Service Process – Step by Step
- 1
Diagnosis. A Level 2 inspection with a camera and a photo report. We look at the flue interior, the firebox, the smoke chamber, the crown, the flashing, and the cap. Nothing gets scheduled until we can show you what we found.
- 2
Repair or install. Loose material is ground out and the flue is cleaned to bare tile before any HeatShield material goes on. FireGuard resurfacing gets applied to firebox and smoke chamber where the substrate is sound; Cerfractory flue sealant covers cracked tile; the damper frame transition gets extra attention.
- 3
Moisture control. Crown repair, flashing work, and a properly fitted rain cap go in alongside the resurfacing, not after. Skipping this step is why most coatings fail early.
- 4
Test and document. We verify the cure and photo-document the finished job, so your next inspection or real estate transaction has a record to work from.
- 5
Warranty. We explain what the application covers and what it doesn’t, in plain language, before you book.
See the difference
Before
After
Before
After
Before
AfterHeatShield Products We Service & Install in Arvada
We service and install the HeatShield flue resurfacing products used to restore chimney integrity without a full rebuild. That includes HeatShield Cerfractory Flue Sealant for cracked clay tile and joint gaps, HeatShield FireGuard for firebox and smoke chamber resurfacing, HeatShield custom-colored firebox coating systems, and HeatShield flue tile joint and spall repair systems.
Each one addresses a different failure. Cerfractory sealant restores the flue’s gas-tight surface. FireGuard rebuilds the firebox face. The custom-colored coating gives a finished firebox that looks right and seals correctly. Spall and joint repair brings damaged tile edges back to a surface the next coating can bond to. We don’t claim to stock any of these; we assess and we apply.
We Also Service These Brands
HeatShield isn’t the only system we work with. We’re multi-brand because the right answer for your Arvada chimney isn’t always the same product. DuraFlex flexible liner systems handle relining work, and Gelco covers other repair needs. That range means we can recommend based on your flue, not on a single brand we’re committed to.
FAQs – HeatShield Chimney Cleaning Service in Arvada
HeatShield is a coating system that resurfaced flues and fireboxes, not a stand-alone liner. It restores the integrity of existing clay tile and masonry rather than replacing it with a new flue. When the flue is structurally crushed, a liner such as DuraFlex is the right answer instead. Call (855) 508-5717 for an assessment.
A properly applied resurfacing can last many years in Arvada, but the lifespan depends more on water control than on the coating itself. If the crown, flashing, and cap keep moisture out, the repair holds; if they don’t, freeze-thaw cycles shorten it. Call (855) 508-5717 for an exact quote.
Often, yes, if the tiles are cracked but not crushed. HeatShield Cerfractory Flue Sealant is designed for exactly that. We’ll confirm with a camera inspection first and show you the evidence. Call (855) 508-5717 for a free estimate.
HeatShield is used on wood-burning fireboxes and flues. Gas fireplaces have different requirements and a different vent system, so the right approach depends on what you have. Call (855) 508-5717 and we’ll tell you what applies.
A properly documented HeatShield repair doesn’t void a chimney warranty; it gives future inspections a record to work from. We photo-document every application. Call (855) 508-5717 to book an assessment.
HeatShield chimney cleaning and repair is priced per job by a written estimate, and the estimate is free. A typical job in Arvada’s older Ranch homes runs higher than a routine sweep because of the inspection and prep work involved. Call (855) 508-5717 for an exact quote.
Book Your HeatShield Service in Arvada, CO
Whether you need a HeatShield firebox resurfacing, a flue sealant repair, or a full assessment after a failed inspection, we’ll show you what we find before we recommend anything. We’re an independent HeatShield service provider, and we name the problem and fix it with the right product. Call (855) 508-5717. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Arvada Chimney Cleaning.